Posted on

TJ Fullmusic PX4/n Data Sheet

Classification- Aubergine-type bulb of glass, a white ceramic base with four-prong bayonet golden pins, oxide coated filamentary, mesh plate or carbon plate triode.

Application -Audio frequency amplifier where power outputs of approximately 4.5watts or less is required at relatively low plate voltages.

Dimensions -Dimensions, outline diagrams of the tube and bases, and the arrangement of electrode connections to the base terminals are shown in Figures 1 and 2.

PX4_01_en

Nominal operating conditions and parameters
Filament voltage* ……………………………………………………………… 4V
Nominal filament current ……………………………………………………… 1A
Plate voltage ………………………………………………………………… 300V
Grid voltage** ……………………………………………………………… -45V
Plate current ………………………………………………………………… 50mA
Impedance ………………………………………………………………… 830 ohms
Amplification factor …………………………………………………………… 5.0
Mutual Conductance ……………………………………………………… 6.0mA/V
Grid current ………………………………………………………………… 0.05 μ A

*Alternating-current filament supply or Direct-current filament supply.
**Alternating-current filament supply is used. The grid and plate returns should be connected to a center tap on the secondary of the filament transformer.
Direct-current filament supply is used. The grid and platter returns are connected to the negative end of the filament.

Characteristics-Average characteristics
Figure 3. shown typical curves of plate currents of grid voltage for several values of plate voltages. It is alternating-current filament supply.

PX4_02Fig. 3

Limiting Operation Conditions for Safe Nor simultaneous ratings
Maximum plate voltage ………………………………………………… 300 volts
Maximum plate dissipation …………………………………………… 15 watts

 

 

507 Total Views 1 Views Today
Leave a Reply

Your email address will not be published. Required fields are marked *