Posted on

TJ Fullmusic 300B Data Sheet

Classification- Dome-type or Aubergine-type bulb of glass, a white ceramic base with four-prong bayonet golden pins, oxide coated filamentary, solid plate or mesh or carbon plate triode.

Application -Audio frequency amplifier where power outputs of approximately 8.5watts or less is required at relatively low plate voltages.

Dimensions -Dimensions, outline diagrams of the tube and bases, and the arrangement of electrode connections to the base terminals are shown in Figures 1, 2 and 3.

300B_01_en

 

Nominal operating conditions and parameters
Filament voltage* …………………………………………………………… 5V or 2.5V
Nominal filament current …………………………………………………… 1.2A or 2.4A
Plate voltage ………………………………………………………………… 300V
Grid voltage** ……………………………………………………………… -58V
Plate current ………………………………………………………………… 60mA
Amplification factor …………………………………………………………… 3.85
Grid to plate transconductance …………………………………………… 5.7mA / V
Grid current ………………………………………………………………… 0.05 μ A
Plate resistance …………………………………………………………… 700 ohms

*Alternating-current filament supply or Direct-current filament supply.
**Alternating-current filament supply is used. The grid and plate returns should be connected to a center tap on the secondary of the filament transformer.
Direct-current filament supply is used. The grid and platter returns are connected to the negative end of the filament.

Characteristics-Average characteristics
Figure 4. shown typical curves of plate currents of grid voltage for several values of plate voltages. It is alternating-current filament supply.

300B_02

Fig. 4

Limiting Operation Conditions for Safe Nor simultaneous ratings
Maximum plate voltage ………………………………………………… 450 volts
Maximum plate dissipation …………………………………………… 40 watts
Maximum plate current of average tube for fixed gird bias ………… 70mA
Maximum plate current of manually adjusted gird or self-biasing circuit……………………………… 100mA

 

1075 Total Views 1 Views Today
Leave a Reply

Your email address will not be published. Required fields are marked *