Posted on

EZ Ultimate Clock System Power Supply

EZ Ultimate Clock System Power Supply

Price: $90.00

Power suppy for EZ Ultimate Clock System for the best performance.

The Power:
• Maxi-Design, choke filtered Power Supply Module
• Gold plated, 70 micron Copper PCB
Specification:
Power Supply Req.: 115V/230V AC
Output: 12V DC

size (LxWxH)
94 x 46 x 38mm

For more info and Reviews, click:

The EZ Ultimate Clock “System”

“The Clock & The Power” Installation Manual

For shipping options, Check our Website by clicking the icon below:

Store

online store

Posted on

EZ Ultimate Clock Module (need to purchase TCXO separately)

EZ Ultimate Clock Module (need to purchase TCXO separately)

Price: $145.00

Yes we are late to the party. We have wanted a clock/ps module for some time but held back due to the extensive documentation required and, we wanted something decisively better – the best.

So … we present the world’s easiest-to-install, ultimate performance digital clock and power supply system:

The Clock:

Base Features:
• Simple Pin-to-pin direct drop-in replacement for any CD/DVD player Clock Crystal (2-Pin)
• Simple drop-in replacement of oscillator modules (4-Pin)
• +/- 1pm accuracy
• 3V / 5V output level setting on board
• Unique clock circuit with ultra-low jitter < 1.5 ps RMS
• On-Board ultra-low noise, ultra-low impedance, wide bandwidth Super Regulator
• LED Voltage monitor
• Gold plated, 70 micron Copper PCB

Specification:
Accuracy: +/- 1ppm
Jitter: 1.5ps
Clock Output: Direct or isolated (selectable)
12V DC/50mA without Power Supply Module

NOT includes the TCXO as shown in the picture

size (LxWxH)
62 x 30 x 20mm

 

For more info and Reviews, click:

The EZ Ultimate Clock “System”

“The Clock & The Power” Installation Manual

For shipping options, Check our Website by clicking the icon below:

Store

online store

Posted on

Ultimate Low jitter, Phase Accurate TCXO

Ultimate Low jitter

The DIYHFS TCXO is selected not only for extremely low jitter, but also for phase integrity.

+/- 1pm accuracy
5V

Price: $35.00

Values Available:
2.8244mhz
8.4672mhz
11.2896mhz (CDP – Most Philips Chipsets)
12.0000mhz (USB Audio)
13.8240mhz
16.9344mhz (CDP – Most Sony/Sanyo Chipsets)
24.0000mhz
67.7376mhz

For more info and Reviews, click:

The EZ Ultimate Clock “System”

“The Clock & The Power” Installation Manual

For shipping options, Check our Website by clicking the icon below:

Store

online store

Posted on

EZ Ultimate Clock System

“The Clock”

Super Regulators There are two “Super Regulators” on “The Clock”. One Super Regulator powers the clock circuit, the other power the special unique buffer section. The regulators use very low noise operational amplifiers, offering a noise performance near the limits of what can be achieved without permanently super cooling the circuit in liquid nitrogen. The Super Regulators also uses the lowest noise voltage reference available (LM329), offering 75nV|/Hz noise performance. This ultra low noise voltage reference is used together with a two-stage low pass, which filters the noise from the reference by a factor of 100 at 1Hz and by a factor of 2500 at 10Hz. The combination makes the lowest noise reference possible for the Super Regulators. More crucially, this performance is maintained even at very low frequencies (< 10Hz). It is the very low frequency noise that tends to dominate jitter in a well designed clock and is very hard to control. Unique buffered output Any clock oscillator’s performance is degraded when being asked to directly drive logic inputs, circuit traces and wiring, some oscillators will not even work at all if loaded too much. Fitting high current, high impedance buffers within millimeters after “The Clock” ensures “The Clock” oscillator operates without any significant load at all. The result is a clock where the theoretical performance of “The Clock” oscillator is realised as it operates into a load and with a power supply that is as close to theoretically perfect as can be made. The Output Buffer drives two separate outputs, one a special circuit that emulates the normal clock crystal found in most players and another that offers an output compatible with the less common 4-Pin “canned oscillator” type. The Crystal Emulation output is not designed to source or sink significant currents. The XO type output can drive up to +/-10mA.

 

“The Power”

Despite being rated at a low 1.2VA output (12V/0.1A), “The Power” uses an oversized 6VA transformer. The transformer is fitted with a special electrostatic screen to ensure lowest noise possible. It uses Full Wave Rectification (not bridge) with two noiseless schottky diodes. It uses chokes filter on the input. It uses a CRCRC power supply filter with 3,000uF total capacitance. It uses a special low noise 12V regulator. The Circuit Design in “The Power” parallels that of a power supply used for a high-end tube preamp, but scaled to the appropriate voltages for “The Clock”.