Posted on

Tentlabs Mini E-Choke (100mA)

Tentlabs Mini E-Choke (100mA)

Price: $43.00

Mini E-Choke is very compact for current below 50mA. It is suitable for preamps.

Like the bigger E-Choke, Mini E-Choke replace traditional chokes that generally work quite well, but suffer from serious disadvantages:

• high weight
• relatively big size
• magnetic field radiation that induces hum in the circuit

Mini E-Chokes effectively solve all these issues, and offer up to 60dB supply ripple reduction.

 

Specifications

Electrical
• maximum current 100 mA
• maximum Vdc 800 V
• internal limit: no
• inductance 10 H
• maximum voltage drop @ Imax 9 V
• short circuit protection no
• protected for inverse connection yes
• maximum heat production 0,9 W
• minimum capacity C1 47 uF
• optimal capacity C1 = C2 100 uF

 

Specifications

Mechanical
Module size: 26*15*15 mm (W*L*H)
Hole pitch: 14 mm (symmetrical). All pin diameters 1.0 mm, pin length 9 mm
Mass: 12 gram

 

Manual

Manual can be downloaded in Tentlab website here.

Warrantee

This module is warranted for 5 years by Tentlabs (the Netherlands), assumed all mounting instructions are followed

For other shipping options, Check our Website by clicking the icon below:

Store

online store

Posted on

Tentlabs Mini E-Choke (50mA)

Tentlabs Mini E-Choke (50mA)

Price: $37.00

Mini E-Choke is very compact for current below 50mA. It is suitable for preamps.

Like the bigger E-Choke, Mini E-Choke replace traditional chokes that generally work quite well, but suffer from serious disadvantages:

• high weight
• relatively big size
• magnetic field radiation that induces hum in the circuit

Mini E-Chokes effectively solve all these issues, and offer up to 60dB supply ripple reduction.

 

Specifications

Electrical
• maximum current 50 mA
• maximum Vdc 800 V
• internal limit for I larger than 68 mA
• inductance 78 H
• maximum voltage drop @ Imax 12 V
• short circuit protection no
• protected for inverse connection yes
• maximum heat production 0,7 W
• minimum capacity C1 27 uF
• optimal capacity C1 = C2 47 uF

 

Specifications

Mechanical
Module size: 26*15*15 mm (W*L*H)
Hole pitch: 14 mm (symmetrical). All pin diameters 1.0 mm, pin length 9 mm
Mass: 12 gram

 

Manual

Manual can be downloaded in Tentlab website here.

Warrantee

This module is warranted for 5 years by Tentlabs (the Netherlands), assumed all mounting instructions are followed

 

For other shipping options, Check our Website by clicking the icon below:

Store

online store

Posted on

Tentlabs E-Choke

Tentlabs E-Choke

Price: $89.00

The E-choke replaces traditional chokes that generally work quite well, but suffer from some disadvantages:
• high weight
• relatively big size
• magnetic field radiation that induces hum in the circuit

The E-choke effectively solves all these issues, and offers up to 70dB supply ripple reduction at currents up to 500 mAdc. In addition, intermodulation distortion reduces dramatically, see the measurements and background articles below.

Pasted Graphic
UL40-S2, triode, distortion no E-choke

Pasted Graphic 1
UL40-S2, triode, distortion with E-choke

Look how effectively the choke removes the hum, but also dramatically reduces the intermodulation products of the signal (1 kHz) with power supply ripple (100 Hz)

 

Specifications

Electrical
• Imax out 500mAdc
• Vmax in 450Vdc (can be adapted to 600Vdc max when changing input capacitor to suitable working voltage)
• Vripple 15Vtt (maximum input ripple)
• C-in 330uF/450V (included on module):
C-in may be reduced linearly when current consumption is lower than 500mA
C-in must be reduced when valve rectification is applied
• C-out 330uF/450V (externally required, recommended value)
• Voltage drop <17Vdc (in-out at 500mAdc load)
• Dissipation <5W
• Heatsink integrated, connected to gnd
• Rejection :
>40dB, time modus off (mostly used with class AB amplifiers)
>60dB, time modus on (recommended for class A amplifiers)
• short circuit NOT protected, always include fuse at module output

Specifications

Mechanical
PCB size: 72*50*50 mm (W*L*H) (includes electrolytic, excludes standoffs)
Hole pitch: 63*41 mm (symmetrical). All hole diameters 3.2 mm

Manual

No manual yet, but Tentlabs is working on it. Connections are fairly straightforward, see example below:
E-choke application
You may want to change the 1N4007 to the better sounding BYV96E

Warrantee

This module is warranted for 5 years by Tenlabs, assumed all mounting instructions are followed

 

For other shipping options, Check our Website by clicking the icon below:

Store

online store