Category: Cable and Wires

Ultimate RCA Interconnect – Direct Contact CCC (pair)

A revolutionary design, the ultimate RCA interconnect. This cable uses a 3mm continuous cast copper as its signal + wire and also as the hot pin of the RCA connector; there is no loss in signal transfer from the connector. The dream cable: no connectors. A must for those seeking the absolute.

Because of the stiffness, customers are requested to add 8″ (20cm) extra on their required lengths.

Continuous cast copper is also employed in the return path and is constructed in a helical structure.

Length: 0.75 meter

CCC WBT Interconnect (pair)

An upgraded version of the high energy X10 IC in continuous cast copper.
For single ended version, WBT connectors are employed.
For balanced version, Neutric connectores are employed.
Length :
1M US$300/PAIR including postage
1.5M US$400/PAIR including postage
2.0 M US$500/PAIR including postage
(for balance configuration, add US$50)

$250 per 1 meter pair

Dynamic interconnect (pair)

An extraordinary dynamic interconnect. The emphasis on speed, punch, wideband performance — making it one of the most interesting interconnects, particularly for Jazz music. This is a very linear cable..

The cable is composed of 1.8mm² and 2.5mm² copper cable. Magnetic grounding is incorporated for noise reduction. It does not magnetize over long period of uses, only gets better and better. The cable is shielded with aluminium foils and RF rejection coating.

$100 for a pair of 1 meter cable. Maximum length is 10 m.

2mm Teflon Served AND Sheathed Small Signal Shielded Cable

This cable has a teflon cover over silvered copper braid and 2 signal wires, also teflon served and silvered high purity copper. Only 2mm total diameter and even though it is teflon, easy to manage. We supply this as standard on our phono and EZ Linestage pre. Sound is smooth and detailed with no edginess. Only 2mm OD. signal wires are 2 x 0.6mm

$1.5 per foot

 

Gotham 10652 small signal cable

Sound is more detailed compare to 10404.

$2.15 per meter

Construction
1 = Jacket: PVC, Ø 4.5mm, purple
2 = Foil shield: PVC-coated aluminiumfoil
3 = Drain wire: 0.4mm tinned copper wire
4 = Stabilisation: PE foil
5 = Cord (2): PVC-strand 1.3mm, quad twisted with conductors
6 = Insulation: Foam-skin PE, 1.3mm diameter, red and white
7 = Conductor: Solid tinned copper wire, 0.5mm (0.19 mm²)

Gotham 10404 small signal cable

Sounds warmer than 10652

$2.7 per meter

Construction: 
1 = Jacket: PVC, Ø 5.4 mm 
2 = Shield No. 1 Bare copper wires (0.10 mm) 100% coverage 
3 = Shield No. 2: Bare copper wires (0.10 mm) 100% coverage 
4 = Separation PVC, Ø 3.1 mm, white tube
5 = Insulation PVC, white and brown Ø 1.2 mm, wrapped, twisted pair 
6 = Conductor: Stranded bare copper wires 48 x 0.07 mm (0.20 mm²)

 

Gotham 54025 High Flexible Speaker Cable (4 x 2.5 mm²)

Four stranded bare copper wires structure designed for bi-wiring. Each stranded wire is made of 140 oxygen-free copper (OFC) wire to provide 2.50mm² cross-sectional area for maximum flexibility. PVC is flame-retarded PVC (IEC 60332-3). Very low conductor resistance : less than 0.0073ohm per meter.

Note: The while PVC in tube center is filling material.

Cable dimension: 9.6mm diameter

$10 per meter

Litz-shielded-stranded speaker cables kit (3 meter pair) with silver banana plugs (8pcs)

Sounds better than $1xxx cable. It’s easy to solder but be patient to open 64 jackets!! Result is saving lots of money and having very good sounding speaker cables.

$299 for a kit or $349 for assembled set.

Shipping $8 by post office registered airmail

 

TEFLON PIPING – below shows internal size, price per meter.

• 30g (∅0.25mm)$0.25
• 24g (∅0.5mm) $0.4
• 20g (∅0.8mm) $0.6
• 18g (∅1mm) $0.75
• 0~1g (∅8mm) $11

 

HEAT SHRINK

∅2.5mm , 3mm, 5mm, 6mm. 12mm, 18mm. $0.25 to $1.8 per 20cm

 

 

 

 

COTTON PIPING

Can fit 4 x 2mm wires. $0.89 per meter

 

 

 

Copper braided sleeving

material : tinned copper

4mm wide when it’s flat. $3 per feet